Vadzo Imaging Validates 13MP Autofocus Camera for Edge AI Systems
News related to:Vadzo Imaging · 2 min read
Vadzo Imaging has validated the Bolt-1335CRA 13MP AR1335 Autofocus MIPI Camera, which is built on the Onsemi AR1335 sensor and confirmed for direct integration with the Rockchip RV1126 processor. This camera is designed to meet the needs of OEMs and system integrators building edge AI vision systems, robotics, kiosks, drones, and industrial vision systems on Rockchip silicon.
The Bolt-1335CRA pairs the AR1335's voice coil motor autofocus lens with the RV1126's on-chip neural processing unit, ensuring that the camera can maintain focus on a moving or variably positioned subject while the inference runs directly on the host processor. This validation confirms the complete MIPI CSI-2 pad chain from the AR1335 sensor through the RV1126's RKISP hardware image processor, providing a proven hardware and driver starting point for OEMs. Output modes span full 13MP capture down to 1080p and 720p, with autofocus control exposed through the platform's standard camera framework.
The camera is rated across a -30 degree C to 70 degree C operating range, making it suitable for outdoor kiosks, drone payload bays, and industrial enclosures where RV1126-based products are commonly deployed. The autofocus response speed is tuned for the frame rates typical of edge AI inference workloads, ensuring that the camera produces sharp frames specifically where the subject sits rather than focusing on the frame center. The camera houses the AR1335 sensor, ISP, autofocus lens assembly, and MIPI CSI-2 interface in a compact form factor with a standard M12 lens holder.
Key specifications of the Bolt-1335CRA include: - 13MP (4208 x 3120) color resolution - Onsemi AR1335 1/3.2 inch 1.1-micron pixel - VCM-based auto-focus with a focus range of 100mm to infinity - MIPI CSI-2 interface - RV1126 Rockchip Processor - -30°C to 70°C operating range
This camera addresses the technical problems often encountered in edge AI vision systems, such as the need for accurate focus and the integration of autofocus with the inference process. By validating the complete MIPI CSI-2 pad chain and exposing the autofocus control path through the platform's standard camera framework, Vadzo Imaging ensures that OEMs can build robust and accurate edge AI vision systems without the need for additional driver development.