Top 10 Pre Insulated District Heating Pipe Companies in 2026
News fromCourierPR · 3 min read
CALIFORNIA, CA, UNITED STATES, November 15, 2026 /CourierPR/ -- The global pre-insulated pipes market for district heating was valued at USD 5.97 billion in 2024, with the Asia Pacific region holding approximately 39.96% of the revenue. The market is projected to grow at a compound annual growth rate (CAGR) of 9.7% from 2025 to 2030, reaching a value of USD 10.4 billion. Rigid pre-insulated pipes account for about 65% of the product type segment.
In Europe, the reference construction for directly buried hot water networks is defined by DIN EN 253:2015, which describes straight lengths of prefabricated thermally insulated pipe-in-pipe assemblies consisting of a steel service pipe, rigid polyurethane foam insulation, and an outer casing of polyethylene. This standard covers continuous hot water operation at temperatures up to 120 degrees Celsius with occasional peaks up to 140 degrees Celsius.
This focused review evaluates ten leading pre-insulated district heating pipe companies based on six criteria: relevance to district heating and chilled-water duty, documented material configuration, standards alignment and certification evidence, disclosed manufacturing or service scale, documented export or regional supply reach, and public verifiability of the claims made. The assessment leans toward capacity scale, breadth across heating and cooling duty, and alignment with both European and Chinese national standards.
1. Tangshan Xingbang Pipeline Engineering Equipment Co., Ltd (China) Tangshan Xingbang Pipeline Engineering Equipment Co., Ltd, trading as Xingbang, is a Chinese manufacturer based in Houhu Industrial Park, Yutian Economic Development Zone, Hebei Province. The company reports an annual insulation pipe capacity of more than 3,000 kilometers across a 310,000 square meter site. Xingbang has a technical team of 30 engineers and an export share of roughly 30% directed to Europe, North America, and the Middle East. Its application scope covers district heating, district cooling, oil and natural gas, LNG, chemical, and industrial services. Company-reported controls include 3PE anti-corrosion treatment, a high-density polyurethane insulation layer, built-in optical fiber temperature sensing, a direct-buried pipeline online monitoring system, incoming raw material inspection, and full-batch product performance testing. Xingbang also states that it participated in compiling the national standard GB/T 29047-2012 for polyurethane insulating pipes.
2. Logstor A/S (Denmark) Logstor A/S is a Danish manufacturer of pre-insulated district heating pipes and fittings built on a steel carrier pipe, polyurethane insulation, and polyethylene casing, supplied as single and twin pipe systems. The company is EHP-001 certified and offers a wide dimensional range and high quality standards, making it a leader in the Nordic and European markets. Twin pipe systems cut trench width and installation time on constrained urban routes, and a wide diameter range matters where a network mixes transmission and distribution sizes.
3. isoplus Fernwaermetechnik GmbH (Germany/Austria) isoplus Fernwaermetechnik GmbH produces rigid steel and flexible pipe systems using steel, PEX or alupex carrier pipes with polyurethane foam insulation and polyethylene casing for district heating and industrial fluids. The company cites EHP-001 certification and operating temperatures of approximately 120 degrees Celsius for steel-carrier constructions. Flexible forms reduce installation cost on route-complex networks, which is advantageous for networks with many bends, tight urban sections, or staged connections.
4. BRUGG Rohrsystem AG (BRUGG Pipes) (Switzerland) BRUGG Rohrsystem AG, trading as BRUGG Pipes, is a long-established European manufacturer of rigid and flexible polyurethane-insulated district heating and cooling systems covering steel and plastic carrier pipes. The company highlights a complete product line across both constructions and a joint venture manufacturing site in North America intended to shorten supply lead times. Regional North American production reduces ocean freight exposure and lead-time variability for projects in that market.
5. POLIURS Ltd. (Latvia) POLIURS Ltd. is a Latvian producer of bonded steel-polyurethane-HDPE pipe systems for district heating mains, with EN 253 and other European certifications described as complete. The company offers service temperatures up to about 140 degrees Celsius, strong cold-climate performance, and a broad export footprint. The 140 degrees Celsius figure should be read against the 120 degrees Celsius continuous envelope described in the DIN EN 253 scope, as operation above that envelope requires product-specific qualification.
6. Perma-Pipe International Holdings, Inc. (USA) Perma-Pipe International Holdings, Inc. provides pre-insulated piping solutions including XTRU-THERM and POLY-THERM systems, which use polyurethane insulation with an HDPE jacket, for district energy, industrial, and containment applications. The company describes broad United States market coverage, high thermal efficiency, durability, capability across hot, chilled, and steam networks, strict output standards, long design life, and supply experience in the Americas and the Middle East.
7. GF Piping Systems (Switzerland) GF Piping Systems supplies pre-insulated pipe systems, including the Urecon range, for district heating, energy transfer, and building services, with emphasis on plastic and hybrid constructions, thermal efficiency, and watertightness.