HALO Introduces Reinforced Isolation DC/DC Converters
News related to:HALO Electronics, Inc · 2 min read
HALO Electronics, Inc., a leading manufacturer of electronic components, has introduced a new series of reinforced isolation DC/DC converters at Electronica 2026 in Munich, Germany. The company's new portfolio includes surface-mount single-output 1W and 2W converters and dual-output 2W converters, offering designers a choice of single or positive-and-negative dual outputs. The new converters feature 4kVDC isolation, reinforced insulation, and 5mm clearance and 8mm creepage, meeting two means of patient protection (2xMOPP).
The single-output family offers nominal inputs of 3.3V, 5V, and 12V, with output options of 3.3V, 5V, and 12V. The DCR14 and DCR24 single-output ranges provide flexibility for designs requiring an isolated voltage, with listed full-load efficiencies reaching 88%. The DCR24 dual-output 2W family offers nominal inputs of 3.3V, 5V, 12V, and 24V, with model-dependent outputs of ±3.3V, ±5V, ±12V, and ±24V. The listed full-load efficiencies for the DCR24 family reach 89%, providing positive and negative isolated rails from a single module.
The new converters are designed for a wide operating temperature range of −40°C to +105°C and feature continuous short-circuit protection. The single-output family offers nominal inputs of 3.3V, 5V, and 12V, with output options of 3.3V, 5V, and 12V. The DCR14 and DCR24 single-output ranges provide flexibility for designs requiring an isolated voltage, with listed full-load efficiencies reaching 88%. The DCR24 dual-output 2W family offers nominal inputs of 3.3V, 5V, 12V, and 24V, with model-dependent outputs of ±3.3V, ±5V, ±12V, and ±24V. The listed full-load efficiencies for the DCR24 family reach 89%, providing positive and negative isolated rails from a single module.
HALO Electronics, Inc. has introduced a new series of reinforced isolation DC/DC converters at Electronica 2026 in Munich, Germany. The new portfolio includes surface-mount single-output 1W and 2W converters and dual-output 2W converters, offering designers a choice of single or positive-and-negative dual outputs. The converters feature 4kVDC isolation, reinforced insulation, and 5mm clearance and 8mm creepage, meeting two means of patient protection (2xMOPP). The single-output family offers nominal inputs of 3.3V, 5V, and 12V, with output options of 3.3V, 5V, and 12V. The DCR14 and DCR24 single-output ranges provide flexibility for designs requiring an isolated voltage, with listed full-load efficiencies reaching 88%. The DCR24 dual-output 2W family offers nominal inputs of 3.3V, 5V, 12V, and 24V, with model-dependent outputs of ±3.3V, ±5V, ±12V, and ±24V. The listed full-load efficiencies for the DCR24 family reach 89%, providing positive and negative isolated rails from a single module.