Haitian International Expands Injection Molding Machine Portfolio
News related to:Haitian International Holdings Ltd · 3 min read
CALIFORNIA, CA, UNITED STATES, October 22, 2026 /CourierPR/ -- Haitian International Holdings Ltd., a manufacturer headquartered at No. 1688 Haitian Road, Xiaogang, Beilun, has released a 2026 industry overview of five established suppliers and the technologies shaping injection molding performance. The company, which operates in the global plastics processing market, documents a portfolio spanning servo-hydraulic toggle, two-platen, all-electric, and multi-component platforms under its Haitian Plastics Machinery, Zhafir Plastics Machinery, and Niigata brands.
Haitian International reports a manufacturing space of 1,437,000 square meters, more than 8,500 employees, and an R&D team of over 1,500. The company produces more than 56,000 machines annually, with exports accounting for about 40% of its output and deliveries to customers in over 130 countries and regions. The global injection molding machine market was valued at USD 17.3 billion in 2025 and is projected to reach USD 25.5 billion by 2033, with a compound annual growth rate of 5.0%. Asia Pacific holds the largest share at 39.7% in 2025.
The electric injection molding machine segment was valued at USD 4.9 billion in 2024, while the total market was estimated at USD 11.66 billion in 2026, rising to USD 18.45 billion by 2034 at a compound annual growth rate of 5.9%. These figures highlight the increasing importance of precision and efficiency in the industry.
Haitian International's portfolio includes the Haitian Mars Series MA5, which offers clamping forces from 600 to 33,000 kN, injection volumes from 49 to 45,616 cm³, screw diameters from 24 to 220 mm, and mold platen sizes from 470 × 470 to 3,100 × 3,020 mm. The Generation 5 version introduces electrical plasticizing, which the company claims can lower energy consumption by 20% to 40%. The MA5/Ultra is a high-response variant, and the MA/F high-speed configuration is listed with injection speeds up to 500 mm/s for thin-wall packaging and in-mold labeling.
The Haitian Jupiter Series JU5, a two-platen system, is listed with clamping forces from 4,500 to 88,000 kN, injection volumes from 848 to 134,303 cm³, screw diameters from 60 to 300 mm, and maximum daylight from 1,400 to 7,000 mm. Four short-stroke clamping cylinders are used to distribute clamping force across the platen, and Generation 5 electrical plasticizing is stated to reduce energy consumption by 20% to 40%. This architecture targets large and deep-cavity molds, including automotive bumpers, instrument panels, logistics containers, and large waste bins.
The Zhafir Venus Series VE5, an all-electric and hybrid platform, is listed with clamping forces from 400 to 13,800 kN, injection volumes from 12 to 5,767 cm³, and screw diameters from 16 to 120 mm. Generation 5 is stated to cut footprint by up to 15%, raise mold movement speed by 20%, and support motorized ejection at up to 400 mm/s. The machines operate without hydraulic oil, which the company links to cleanroom-grade production for medical, precision electronics, optics, and cosmetic packaging. The Zeres Series ZE5 keeps the same size envelope but adds integrated hydraulics for mold functions such as core pulls, while the ZE-F configuration is positioned as a high-speed packaging platform at 1,500 to 6,500 kN.
The Zhafir Multicomponent platform is listed at 3,500 to 33,000 kN for two-color, multi-color, multi-material, and hard-soft molding. The Zhafir Jeres Series JE5 applies a hybrid two-platen concept in the same clamping-force band. The Niigata MD-S8500 horizontal all-electric range, from MD50S8500 to MD350S8500, adds tie-bar sensing, pressure control down to 0.1 MPa, and OPC UA connectivity. The MDV-S8500 vertical platform addresses insert and overmolding work.
On the digital side, the group documents MES solutions for production monitoring and process-data management, plus open interfaces and standardized communication protocols that allow robots, vision inspection systems, and third-party equipment to be integrated into automated cells. The company also reports more than 400,000 Mars Series units delivered to date.
The release emphasizes that six key metrics determine whether a machine is comparable in practice: clamping force against the projected area of the mold, injection volume, screw diameter, and injection rate against shot weight and wall thickness, energy consumption per kilogram of polymer, controller platform and protocol support, and hydraulic architecture. The competitive consequence is transparency, with manufacturers that publish complete technical details being easier to include in a tender.